Wynnum North (South East Queensland) 2013 ...

URL: http://www.ehp.qld.gov.au/data-sets/air-quality/wynnum-aq-2013.csv

Industry-operated monitoring site: Data presented as received by Queensland Government
Period of operation: 1 January to 31 December 2013
Site location: Latitude: -27.4296; Longitude: 153.1581
AS/NZS 3580.1.1:2007 site classification: Neighbourhood
AS/NZS 3580.1.1:2007 compliance (pollutants): Complies fully
AS/NZS 3580.14:2011 compliance (meteorology): Complies fully
Wind sensor: Ultrasonic sensor

  • Height above ground level: 10 metres.

Temperature: Capacitive ceramic sensor

  • Height above ground level: 3 metres.

Relative humidity: Capacitive thin film polymer sensor

  • Height above ground level: 3 metres.

Rainfall: Tipping bucket rain gauge.
Barometric pressure: Capacitive silicon sensor.

  • Height above ground level: 2 metres.

Oxides of nitrogen: Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1—2010

  • Instrument output offset and/or scaled based on calibration and daily zero/span response data.

Sulfur dioxide: Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1—2008.

  • Instrument output offset and/or scaled based on calibration and daily zero/span response data.

PM10: Tapered Element Oscillating Balance (TEOM) Model 1400AB operated in accordance with AS 3580.9.8—2001

  • Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter.
  • Instrument output values are adjusted in accordance with US EPA equivalence designation method EQPM-1090-079 requirements (scaled by 1.03, offset by +3.0).
  • After adjustment, negative hourly PM10 concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3.

PM2.5: Tapered Element Oscillating Balance (TEOM) Model 1400AB operated in accordance with AS 3580.9.8—2001

  • Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter.
  • Reported values are unadjusted instrument output values as per the requirements of the Air NEPM Technical Paper on Monitoring for Particles as PM2.5.
  • Negative hourly PM2.5 concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3.

This resource view is not available at the moment. Click here for more information.

Download resource

Additional Information

Field Value
Last updated May 1, 2018
Created May 29, 2015
Format CSV
License Creative Commons Attribution 4.0
Size 666 KiB